PP Biaxial Geogrid for Road Construction in Chile

PP Biaxial Geogrid is produced through the process of extruding, punching, heating and stretching.The properties of Biaxial Geogrids, made in Polypropylene (PP) with their square apertures, high tensile strength and optimised geometry of nodes and ribs make them equal to any other similar material. The reinforcing action of PP Biaxial Geogrids lies mainly in confining soil and increasing its shearing resistance by a process of interlocking between the square ribs and the soil. The load dispersal effect from the interlocking mechanism is highly effective and can reduce sub-base thickness and construction cost. PP Biaxial Geogrids can be used with any kind of mechanical fill material. Two aperture size ranges are available for optimum matching with project fill. The material has great tensile strength in both longitudinal and transverse directions. This structure can also provide an ideal interlocking system for more effective force bearing and diffusion in the soil, which is suitable for large-area permanent bearing foundation. Biaxial plastic geogrid Function: suitable for various dams and roadbed reinforcement, slope protection, cave wall reinforcement, large airports, parking lots, wharf cargo yards and other permanent bearing foundation reinforcement. The characteristics of the Biaxial plastic geogrid products: 1. Increase the bearing capacity of the road (foundation) and prolong the service life of the road (foundation); 2. Prevent the road (ground) from collapsing or cracking, Keep the ground beautiful and tidy; 3. Convenient construction, saving time and effort, shortening the construction period and reducing maintenance costs The TINM website received an inquiry about geogrid from a Chilean customer. After communicating with the customer, the TINM team understood the customer’s engineering plan and product requirements. The PP 30/30 geogrid was recommended and samples were sent to the customer. After receiving the samples, after professional testing, the customer was very satisfied with the quality of the geogrid, and then confirmed the order

Specifications of PP Biaxial Geogrid for Road construction in Chile

  • Tensile Strength– 30KN/30KN • Each roll size – 3.95m*50m • Total quantity – 26267.5 m2

Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

1 thought on “PP Biaxial Geogrid for Road Construction in Chile”

  1. Pingback: PP Biaxial Geogrid for Road Construction | geos...

Leave a Comment

Your email address will not be published.

On Key

Related Posts

Construction waste landfill

一、 Methods and requirements for soil foundation cleaning and rolling in the landfill area. 1、 Methods and requirements for soil foundation cleaning and rolling in

Contact US